Liên hệ với chúng tôi

Kinh doanh
Mr.Tuấn : 0904132679
Email : thaihacnc.kd1@gmail.com

Hotline
Mr.Thái : 0985225238
Email : thaihacnc@gmail.com

Liên hệ với chúng tôi

Kinh doanh
Mr.Tuấn : 0904132679
Email : thaihacnc.kd1@gmail.com

Hotline
Mr.Thái : 0985225238
Email : thaihacnc@gmail.com

Tin tức mới
Like facebook
Khuyến mãi

AC Hybrid Servo 86HBM80 và Driver HBS758 Leadshine

AC Hybrid Servo 86HBM80 và Driver HBS758 Leadshine

AC Hybrid Servo 86HBM80 và Driver HBS758 Leadshine

Mã sản phẩm:
hbs2206
Tình trạng:
Còn hàng
Giá:
4.800.000 VNĐ
Số lượng:
 
Giới thiệu sản phẩm
 
 Thế hệ động cơ Ac servo hibrid hoàn toàn mới , công suất cao , dễ dàng vận hành HBS758 +  Motor 86HBM80-1000 
 
Thông số kĩ thuật driver HBS758
 

Stepper based servo control for stepper motors with encoders

Step & direct, or CW/CCW control
Closed position loop for no loss of steps
70 VAC input voltage
Load based output current of 0.50 - 6.00 A
default 200KHz input frequency; 500Khz optional
Quick response and acceleration
No torque reservation
Extra low drive motor heating & noise
No hunting, no overshooting, almost zero settling time
No tuning & "plug-and-play" for almost all applications
No power supply for direct AC input
Model:  HBS2206
Phase:   3
Control Mode:   Step & Direction
Max Input Frequency:  200KHz
Encoder Feedback:   Yes. Fully close the loop between the drive and drive motor
Input Voltage Range:   150 - 240 VAC
Peak Current:  6.00 A
Software Cofig Resolution Range:   200 - 102,400 (increased by 200)
Default Step Resolution:   4000
Default Holding Current Percentage:   20 %
Communication Type:  RS232
Pulse enabled at:   Rising edge
Isolation Resistance:   500M Ohm
Environment:   Avoid dust, oil fog and corrosive gases
Ambient Temporature:   0-50°C
Humidity:   40–95% RH
Operating Temporature:   0-70°C
Vibration:   5.9 m/s2 Max
Storage Temperature:   -20-65°C
Specification:   6.69 X 5.51 X 2.76 Inches
Weight:   3.96 lbs

 

Model:  86HBM80-1000 

Frame Size:   NEMA 34
Phase:   2
Step Angle: 1.8°
Holding Torque:   8.0 Nm (1133 Oz-in)
Number of Leads:   3
Encoder Resolution:   1,000 Line
Shaft Size:   0.551 inch  (14.000 mm)
Targeted Input Voltage  : 220/230 VAC
Phase Current:   3.0 A
Inductance:   18.33 mH
Resistance:   2.34 Ohm
Rotor Inertia:   0.0564 oz-in-sec2
Length:   6.81 inch  (173 mm)
Weight:   12.33 lbs  (5.6 kg)
c
 
 
 

Sản phẩm liên quan

0985225238